Are the front engine mounts on a 175/160cc the same as the 250/350/450?
Thanks in advance.
NC Engine Mounts
Moderator: ajleone
-
- Posts: 604
- Joined: Tue May 22, 2012 12:52 pm
- Location: near Frankfurt, Germany
Re: NC Engine Mounts
No, they aren't. All have different spare part numbers, which could have been easily found out by looking into the catalogs.
cheers Hans
cheers Hans
-
- Posts: 772
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: NC Engine Mounts
the narrowcase front engine plates are not the same as from a widecase engine .
on the narrowcase 125 and 160 frames the pieces of tubing welded into the downtube are shorter . if one want to put a 250 or 350 engine into a 125/ 160 frame you need 4 spacers about 11 mm long .
Eldert
on the narrowcase 125 and 160 frames the pieces of tubing welded into the downtube are shorter . if one want to put a 250 or 350 engine into a 125/ 160 frame you need 4 spacers about 11 mm long .
Eldert
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 27 guests