Page 1 of 1
Looking for a cam bearing cap
Posted: Sat Apr 06, 2019 1:53 pm
by HMBAtrail
Anyone have a cam bearing cap they want to sell? I'm not looking for a pristine one as I'm tapping it for an external oil feed. My 350 cap is in pretty good shape so it seems a shame to destroy it by drilling and tapping.
Let me know yeah?
Re: Looking for a cam bearing cap
Posted: Sun Apr 07, 2019 9:58 pm
by double diamond
If you have a good bearing cap, (especially for a 350 which are uncommon) definitely want to preserve it. I have a few “race condition” caps I would part with. See attached.
Matt
Re: Looking for a cam bearing cap
Posted: Sun Apr 07, 2019 10:43 pm
by double diamond
A59F6D4E-DF58-4E66-8F7A-0E33107793BB.jpeg
Re: Looking for a cam bearing cap
Posted: Sun Apr 07, 2019 11:22 pm
by HMBAtrail
It matters not a whit to me on which one. It is going to get drilled and tapped so whichever one you want to part with the most is fine with me. I will send you a PM.
Re: Looking for a cam bearing cap
Posted: Mon Apr 08, 2019 5:33 pm
by HMBAtrail
I tried sending you a PM but it is sitting in my outbox and not getting delivered it seems.
Re: Looking for a cam bearing cap
Posted: Mon Apr 08, 2019 7:30 pm
by Eldert
that is how the pm 's work on this forum . it will sit in your outbox untill Matt opens your message .
Eldert
Re: Looking for a cam bearing cap
Posted: Mon Apr 08, 2019 8:04 pm
by LaceyDucati
I've sent you an Email, as I do have a new Condor cap that would be ideal.
Nigel