'66 250 frame - is this correct?

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

kaysystems
Posts: 78
Joined: Mon Jan 14, 2013 1:57 pm
Location: Charlottetown, PEI, Canada

'66 250 frame - is this correct?

Postby kaysystems » Sat Dec 15, 2018 9:46 pm

Getting ready to have the frame blasted. I was looking at the mounts for the triangular toolboxes. Are the holes supposed to be different on each side?

j%iXMH9tQeG7Jk6R7EJKgA.jpg


YCB1LBzLSxGq4MTZ5aNWkw.jpg



Thanks

David
You do not have the required permissions to view the files attached to this post.
1967 Narrowcase 250
2004 Ducati ST3

nalimugmug
Posts: 116
Joined: Mon Sep 12, 2011 3:40 pm
Location: South Glos UK

Re: '66 250 frame - is this correct?

Postby nalimugmug » Sat Dec 15, 2018 11:26 pm

Here is the correct tab
You do not have the required permissions to view the files attached to this post.

Bevel bob
Posts: 1043
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: '66 250 frame - is this correct?

Postby Bevel bob » Sun Dec 16, 2018 7:55 am

Really?,nothing like mine!.

nalimugmug
Posts: 116
Joined: Mon Sep 12, 2011 3:40 pm
Location: South Glos UK

Re: '66 250 frame - is this correct?

Postby nalimugmug » Sun Dec 16, 2018 9:34 am

Same bike with frame number
67.jpg
You do not have the required permissions to view the files attached to this post.

ranton_rambler
Posts: 439
Joined: Sun Jun 04, 2017 11:33 am
Location: Stafford UK

Re: '66 250 frame - is this correct?

Postby ranton_rambler » Sun Dec 16, 2018 1:28 pm

DSCF6055small.jpg


This is what's on mine (1961 175TS). Looks to be the same both sides.

Ian
You do not have the required permissions to view the files attached to this post.

Bevel bob
Posts: 1043
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: '66 250 frame - is this correct?

Postby Bevel bob » Sun Dec 16, 2018 2:02 pm

Thats more like it, I had to pack my mounts with washers to get the toolboxes to look right.

kaysystems
Posts: 78
Joined: Mon Jan 14, 2013 1:57 pm
Location: Charlottetown, PEI, Canada

Re: '66 250 frame - is this correct?

Postby kaysystems » Sun Dec 16, 2018 3:46 pm

Thanks folks. I'll get the big hole welded up to be the same on both sides.

David
1967 Narrowcase 250
2004 Ducati ST3


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: Google [Bot] and 56 guests