Clutch slip 250 NC

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Bevel bob
Posts: 1042
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Clutch slip 250 NC

Postby Bevel bob » Mon Jun 04, 2018 4:04 am

Yesterday I noticed that there appeared to be some slip, The plates are Nigels thicker set which uses 1 less than STD. I can't imagine there is anything wrong with them,so considering spring pressure . Does it work to pack the springs? , I will be taking it down shortly and will check for even lift,bust springs, loose screws etc. An earlier post by Nigel mentions the use of a 1mm spacer with the thicker plates?.

Bevel bob
Posts: 1042
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: Clutch slip 250 NC

Postby Bevel bob » Tue Jun 05, 2018 7:22 pm

Nigel has given me the gen on this, I think its likely that a spring screw has come loose or a spring broke, We will see.


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 37 guests