Page 1 of 1
Narrowcase front guard
Posted: Sat Apr 07, 2018 11:08 am
by Bevel bob
A fellow enthusiast has sold me a guard for my 66/67 mark 3 NC, he said it was from a Mach1 and it will do fine. I am interested to find out what it started life on. The only unusual thing is it has a very narrow center bridge (about 25mm) which widens and bulges out at the fork fixing . I think its from an Elite or 175 silverstone,any idea?.
Re: Narrowcase front guard
Posted: Sat Apr 07, 2018 7:04 pm
by DBDBrian
Here you go Bob, This is the centre stay off my 1959 200SS, which I think would have been the same on the Elite and Silverstone. I removed it from the guard for blasting and painting.
Brian
P1060473.JPG
P1060478.JPG
attachment=2]P1060473.JPG[/attachment]
Re: Narrowcase front guard
Posted: Sat Apr 07, 2018 7:09 pm
by Bevel bob
Hi Mate,well that eliminates one type!, mine has no impressed reinforcing and has bulges to bolt on the forks as it would be too narrow . Perhaps a 175 Silverstone?,I have also gained a blue /gold stripe widecase rear, a widecase stand and a pair of brake plate stays for a twin side sls brake.Offers?