Narrowcase front guard

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Bevel bob
Posts: 1043
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Narrowcase front guard

Postby Bevel bob » Sat Apr 07, 2018 11:08 am

A fellow enthusiast has sold me a guard for my 66/67 mark 3 NC, he said it was from a Mach1 and it will do fine. I am interested to find out what it started life on. The only unusual thing is it has a very narrow center bridge (about 25mm) which widens and bulges out at the fork fixing . I think its from an Elite or 175 silverstone,any idea?.

DBDBrian
Posts: 197
Joined: Mon Mar 30, 2015 11:29 pm

Re: Narrowcase front guard

Postby DBDBrian » Sat Apr 07, 2018 7:04 pm

Here you go Bob, This is the centre stay off my 1959 200SS, which I think would have been the same on the Elite and Silverstone. I removed it from the guard for blasting and painting.

Brian
P1060473.JPG

P1060478.JPG

attachment=2]P1060473.JPG[/attachment]
You do not have the required permissions to view the files attached to this post.
Last edited by DBDBrian on Sun Apr 08, 2018 9:26 am, edited 1 time in total.
Brian
Made in England

Bevel bob
Posts: 1043
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: Narrowcase front guard

Postby Bevel bob » Sat Apr 07, 2018 7:09 pm

Hi Mate,well that eliminates one type!, mine has no impressed reinforcing and has bulges to bolt on the forks as it would be too narrow . Perhaps a 175 Silverstone?,I have also gained a blue /gold stripe widecase rear, a widecase stand and a pair of brake plate stays for a twin side sls brake.Offers?


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 29 guests