Re: direct replacement 6 Volt rectifier for Monza
Posted: Sat Feb 10, 2018 10:13 pm
Saga continues.....
Thanks again Hans for that info... I'm not giving up on this now its got me vexed...
pulled the regulator apart.
There is continuity between the centre lead and each respective diode in one direction only which would imply that they are ok.?
There another 2 other components hiding under the black sheathing behind the 2 main diodes.?
The 27ohm resistor has obviously got very hot in the past but is reading 28-29 ohms so probably also ok.?
the link to the rebuild section of the regulator is very useful in how to pull the thing apart. However of very limited use as the regulator was ok in the article but in the write up doesn't define what ok actually is.??
Thanks again Hans for that info... I'm not giving up on this now its got me vexed...
pulled the regulator apart.
There is continuity between the centre lead and each respective diode in one direction only which would imply that they are ok.?
There another 2 other components hiding under the black sheathing behind the 2 main diodes.?
The 27ohm resistor has obviously got very hot in the past but is reading 28-29 ohms so probably also ok.?
the link to the rebuild section of the regulator is very useful in how to pull the thing apart. However of very limited use as the regulator was ok in the article but in the write up doesn't define what ok actually is.??