350 valve adjustment
Posted: Wed Jan 31, 2018 10:43 pm
I did a fair amount of searching on this website and others as well as my books and cannot get a definitive answer on what to set the valve clearances at for my 350 project bike. This Ducati is a wide case, engine #06095. It was registered as a 1969 but the chassis tag shows 196_ so not sure exactly when it was built. It is not a Desmo and has the green/white markings on the cam. From my reading here it looks as though there may or may not have been 2 different green/white cams. Currently the intake valve is reading 0.004" and the exhaust is reading 0.006". It has not run in years. Trying to learn more about this fascinating engine. Thanks