Page 1 of 1
Mudguard wanted
Posted: Tue Jan 09, 2018 8:05 pm
by tweaky beast
I am after a front mudguard for my Conundrum that is close to the one in the picture ( taken in 1965). the wheel is 19" and it looks 2 1/2 t0 3 inches wide. Steel or alloy. Any help?
Scan0003.jpg
Re: Mudguard wanted
Posted: Wed Jan 10, 2018 6:10 am
by Bevel bob
Don't think 19" wheels used much on Ducs and spare ones very rare and exspensive.
Re: Mudguard wanted
Posted: Wed Jan 10, 2018 3:06 pm
by tweaky beast
Don't have to be off a Ducati . I thought people might have advice is they know of the type would fit.
Re: Mudguard wanted
Posted: Wed Jan 10, 2018 3:53 pm
by Bevel bob
The forks are not Ducati and the rim diameter is bigger than we normally use, Probably just about any other Forum would do better than we will!, However anything Ducati related we will be pleased to help.Can't help thinking thats a heavy frame for a 160 sprinter,
Re: Mudguard wanted
Posted: Wed Jan 10, 2018 5:27 pm
by Eldert
plenty Ducati's out there with 19 inch front fenders . al the Scramblers had them
so did the 74 blue / gold Mark3 tourer
Eldert
Re: Mudguard wanted
Posted: Wed Jan 10, 2018 8:14 pm
by Jordan
Re: Mudguard wanted
Posted: Wed Jan 10, 2018 8:43 pm
by Gianni
Eldert,
To my gimlet eye, the Blue & Gold front fender stamping is identical to the 1974 750GT front fender. The fender
mounts somewhat differently, a riveted stamping plus the GT type wire mounting, both secured on the fork slider studs. Might be an option for you, glass fiber re-pops are easily had. I will be using a spare GT fender for my knackered B&G front. It would seem that the additional rigidity
provided by the stamped mount is not needed.