Looking for 265 Needle Jet

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Vintmoto
Posts: 43
Joined: Sat Apr 11, 2015 2:54 am

Looking for 265 Needle Jet

Postby Vintmoto » Fri Dec 08, 2017 1:57 pm

Hey Singles Fans,

I am rebuilding a SSI 29d carb and need a 265 Needle Jet that is not worn. If anyone knows where I might be able to locate one, I am willing to pay or trade for it.

Thanks in advance,

Ken

ducwiz
Posts: 604
Joined: Tue May 22, 2012 12:52 pm
Location: near Frankfurt, Germany

Re: Looking for 265 Needle Jet

Postby ducwiz » Fri Dec 08, 2017 2:32 pm


Vintmoto
Posts: 43
Joined: Sat Apr 11, 2015 2:54 am

Re: Looking for 265 Needle Jet

Postby Vintmoto » Fri Dec 08, 2017 4:05 pm

They list it as unavailable unless it is because I am in the USA. If someone in Europe could check it it shows stock availble, that would be great. I would be happy to pay someone to purchase it and forward it on to me if it is in deed available.

Ventodue
Posts: 952
Joined: Mon Mar 08, 2010 3:23 pm
Location: Montpellier, France

Re: Looking for 265 Needle Jet

Postby Ventodue » Sat Dec 09, 2017 9:08 am

You do not have the required permissions to view the files attached to this post.

Vintmoto
Posts: 43
Joined: Sat Apr 11, 2015 2:54 am

Re: Looking for 265 Needle Jet

Postby Vintmoto » Sat Dec 09, 2017 12:37 pm

Buzzing only had 270s available. Not sure how much of a difference the step up in size would be. If anyone has more expience with this I would love to hear their insight. I am assuming my 265 Needle jet is worn since the needle showed obvious signs of wear. Which I knew how to measure it to see how far out it really is.

Jordan
Posts: 1380
Joined: Fri Dec 24, 2010 11:29 am

Re: Looking for 265 Needle Jet

Postby Jordan » Sat Dec 09, 2017 1:47 pm

Normal fix for a slightly worn needle jet is to lower the jet needle to compensate.

Bevel bob
Posts: 1042
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: Looking for 265 Needle Jet

Postby Bevel bob » Sat Dec 09, 2017 7:20 pm

I use a 260 and find it to work well in a Tuned 250 Mark3 NC ,and I still get symptoms of richness .

Vintmoto
Posts: 43
Joined: Sat Apr 11, 2015 2:54 am

Re: Looking for 265 Needle Jet

Postby Vintmoto » Sun Dec 10, 2017 11:56 pm

I suspect going smaller would be fine as well as my bike always ran a litttle rich with the 265 also. Well if anyone has a 260 they would part with, I would be happy with one of those as well.

Bevel bob
Posts: 1042
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: Looking for 265 Needle Jet

Postby Bevel bob » Mon Dec 11, 2017 11:54 am

Got my 260 from Australia. I did notice that it has no air bleed hole, I dumped the 265 so it would be helpfull if you could look at your 265 and give measurements for it?, I could try drilling the 260, if it does not help I will just solder it back up.

Vintmoto
Posts: 43
Joined: Sat Apr 11, 2015 2:54 am

Re: Looking for 265 Needle Jet

Postby Vintmoto » Thu Dec 21, 2017 12:45 pm

Seems it would be a good opportunity for someone to have some made up. Seems like it would be pretty easy. I may look into it once I get a little more time.


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 45 guests