Motoscrubs.com

Posted: **Wed Sep 20, 2017 1:08 am**

My 250 bitsa's throttle cable strands began to break at the carb slide end causing the throttle to stick open.

Before I shop the Internet I would rather spend money with vendor list members who frequent our forum and give us all free advice.

Does any vendor out there have throttle cables?

The fun end is a Super Practic mounted to a clip-on, while the business end is a Mikuni round barrel slide carb with cable geometry similar to a Del 'Orto SSI.

I would think a Mach1/Mark3 standard cable would suit my application.

Jim

Posted: **Fri Sep 22, 2017 11:20 am**

Jim
I think just about everyone sells cables, but you'll have to look around as they all offer different ones at different prices. Throttle cables are easy to find on eBay for Aermacchi and Benelli makes. Syd's makes cables also I had them make a few for me. For a throttle cable I'd probably buy a cheap one off eBay for a Benelli and make it fit.
Aaron

Posted: **Fri Sep 22, 2017 2:26 pm**

Nigel Lacey, Jim? But I'm not sure that, with the postage cost across the Pond, it would be worthwhile - unless you buy lots of other goodies at the same time ...

Posted: **Fri Sep 22, 2017 8:54 pm**

Bought from this guy before. Good stuff cheap.
Tony

http://www.ebay.com/itm/Vintage-Ducati- ... ix&vxp=mtr

Motoscrubs.com

Any vendors on list with throttle cables?

Any vendors on list with throttle cables?

Re: Any vendors on list with throttle cables?

Re: Any vendors on list with throttle cables?

Re: Any vendors on list with throttle cables?