Kickstart lever for rear sets

[HMBAtrail]

For those of you on bikes with rear sets, what kicker are you using? I have aftermarket rear sets with a folding foot peg but not a folding toe peg. I've done a search but didn't come up with anything definitive.

Thanks,
Tim

[halfpast]

The one shown in the second pic on this page looks good:

viewtopic.php?f=3&t=36&start=10

[Bevel bob]

That would not work for me, lever too short and too close to the fixed? footrest, too easy to hurt yourself.

[HMBAtrail]

Were stock kickers on bikes with rear sets more curved and were located behind the foot peg?

[ducwiz]

Here http://roadandrace.com.au/cat14.htm you can see the "bowed" levers for the rear sets (2nd and 3rd from top, right).

cheers Hans

EDIT:

[DesmoDog]

I bent the stock part and trimmed the toe piece on the rearset lever.

[jbcollier]

Why not just fit a folding foot peg as well?

[HMBAtrail]

I do have a folding foot peg. Just not a folding toe peg.

[Moto Chuck]

Listing on Ebay for one of the Mark3/Mach1 kick start levers to go with rearsets. Not my listing and I provide it just as information.
http://www.ebay.com/itm/Kickstart-Lever-Vintage-Ducati-250-350-Mark-III-Mach-1-Diana-Desmo-303/132305042583?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[Zoomersmoto]

I bent the stock part and trimmed the toe piece on the rearset lever.

Cool Desmodog!