4-speed 250 Mark 3 tach holder

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

ajleone
Posts: 230
Joined: Sat Oct 31, 2009 11:20 pm
Location: Pittsford, NY
Contact:

4-speed 250 Mark 3 tach holder

Postby ajleone » Sat Apr 29, 2017 9:13 pm

Anyone have a template for the Veglia tach holder for a Diana Mark 3? This is the one that is centered between the fork tubes, that was on the 4-speed Mark 3 and I believe similar to the F3. Thanks.
Tony

KarstenH
Posts: 71
Joined: Sun Nov 20, 2011 5:44 pm

Re: 4-speed 250 Mark 3 tach holder

Postby KarstenH » Sun Apr 30, 2017 11:21 am

Hello Tony,

please look at
viewtopic.php?f=3&t=1475&p=11814&hilit=tach+bracket#p11814
there are some drawings and fotos - i have made a sketch with icad - but im not sure about the masses from the holes for the fork tubes and the axial distance from this holes.

Regards Karsten

ajleone
Posts: 230
Joined: Sat Oct 31, 2009 11:20 pm
Location: Pittsford, NY
Contact:

Re: 4-speed 250 Mark 3 tach holder

Postby ajleone » Sun Apr 30, 2017 5:05 pm

Thanks Karsten. I'll see if I can make a couple of these. I'll have to eyeball it, but I am sur I can get close.
Tony

KarstenH
Posts: 71
Joined: Sun Nov 20, 2011 5:44 pm

Re: 4-speed 250 Mark 3 tach holder

Postby KarstenH » Mon May 01, 2017 6:12 am

Hello Tony

my sketch...
I need the exactly red masses - then i can correct my drawing.

Tacho Bracket.jpg



Regards Karsten
You do not have the required permissions to view the files attached to this post.


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 43 guests