Page 1 of 1
Trying to find Clutch Basket nut size(Monza 250)
Posted: Wed Apr 05, 2017 12:53 am
by halfpast
Hi all,
As the title says, I'm looking to find the size of a few nuts, namely the one that holds the clutch basket in as well as the one holding the gear on the flywheel. Your help is greatly appreciated.
Re: Trying to find Clutch Basket nut size(Monza 250)
Posted: Wed Apr 05, 2017 1:26 am
by CaptonZap
Re: Trying to find Clutch Basket nut size(Monza 250)
Posted: Wed Apr 05, 2017 7:33 am
by Madman
Do you mean the M16x1 that is in the parts manual? It sits in the clutch basket and is accessed after the clutch stack is removed.
Re: Trying to find Clutch Basket nut size(Monza 250)
Posted: Wed Apr 05, 2017 5:46 pm
by halfpast
Ended up buying a 'large' metric socket set. For the record, the clutch basket nut is a 25mm and the flywheel nut is 30mm.
Re: Trying to find Clutch Basket nut size(Monza 250)
Posted: Wed Apr 05, 2017 5:56 pm
by Madman
As I said M16, but in isometric that means a 24mm spanner.
