Tool would have probably held up if I had used a larger diameter piece of barstock. But again, it was a Sunday was was limited to what I had in my stock. There was no Loctite.
Cam is hardened. Mild steel tool should not damage it.
regards,
Rob
250 Monza Cam nut removal
Moderator: ajleone
-
Snakeoil
- Posts: 109
- Joined: Fri Jun 17, 2016 12:10 pm
- Location: Upstate NY
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: Paradiso, ranton_rambler and 140 guests