Page 1 of 1
Monza Junior 160 Output Sprocket
Posted: Tue Mar 29, 2016 9:54 pm
by Honduc
Hello, I have been riding and building bikes all of my life, this is the first Ducati I have owned. it is about half of a 66 Monza Junior and I have a question: is the output sprocket (front sprocket) the same as the 250 and larger singles?
Re: Monza Junior 160 Output Sprocket
Posted: Wed Mar 30, 2016 5:31 am
by Eldert
dont know about the 160 cc but the 125 uses a 420 chain and the 175 thru 350 cc uses a 428 chain . pitch is the same on both sprockets but the 420 item is smaller . a 428 sprocket would fit a 125 tho .
Eldert
Re: Monza Junior 160 Output Sprocket
Posted: Wed Mar 30, 2016 8:58 pm
by Honduc
thanks, the 160 is supposed to be an overbored 125 so I think the bottom ends should be the same
Re: Monza Junior 160 Output Sprocket
Posted: Wed Mar 30, 2016 9:14 pm
by Eldert
the splines on the outputshaft are al the same . you can fit a 420 , 428 or a 450 's 530 sprocket .
they al fit .
Eldert
Re: Monza Junior 160 Output Sprocket
Posted: Thu Mar 31, 2016 6:58 pm
by Honduc
Thanks, that's what I needed to know