kickstarter return

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

flanker
Posts: 104
Joined: Mon Apr 06, 2015 1:22 pm

kickstarter return

Postby flanker » Wed Feb 10, 2016 3:11 am

Hey guys just finished my rebuild. It fired right up after 4 kicks!!! sounded great too. but the only issue I'm having is the kickstarter does not return back to the upright position i have to do it manually.... Any ideas of how i went wrong. thx rob

ducwiz
Posts: 604
Joined: Tue May 22, 2012 12:52 pm
Location: near Frankfurt, Germany

Re: kickstarter return

Postby ducwiz » Wed Feb 10, 2016 6:49 pm

Narrow or wide case model?

..

flanker
Posts: 104
Joined: Mon Apr 06, 2015 1:22 pm

Re: kickstarter return

Postby flanker » Wed Feb 10, 2016 8:07 pm

Nc! It's starting to come back to parrallel with ground but only sometimes. Here r some pics of build. I may need a stronger spring, but I remember there being a lot of tension when I wound the spring

image.jpg


image.jpg


image.jpg


image.jpg
You do not have the required permissions to view the files attached to this post.

Eldert
Posts: 771
Joined: Sun Nov 01, 2009 3:23 pm
Location: Hazerswoude Rijndijk Netherlands

Re: kickstarter return

Postby Eldert » Wed Feb 10, 2016 8:41 pm

Hi Rob

did you try removing a shim behind the cover ?

Eldert

flanker
Posts: 104
Joined: Mon Apr 06, 2015 1:22 pm

Re: kickstarter return

Postby flanker » Thu Feb 11, 2016 6:07 am

I think your right. The shim must go. It's running so well except for that. The eldert


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 47 guests