Page 1 of 1
250 Narrow Case points cam
Posted: Wed Apr 22, 2015 4:04 am
by alno
Hello,
I'm looking for a 250 narrow case points cam. Does anyone have one they would like to sell?
Thank You
Al
Re: 250 Narrow Case points cam
Posted: Wed Apr 22, 2015 6:34 am
by DewCatTea-Bob
[quote= alno ...
" I'm looking for a 250 narrow case points cam. "
____ As like many other submitted posts tend to be,, yours also lacks sufficient wording details, in order to otherwise be straight-forwardly responded-to (without leaving readers wondering about some un-clarified specifics)...
__ Do you mean a 'points cam' itself, or it's entire complete AAU.assembly ?
Also, you didn't bother to specify which model ! _ That omission could possibly allow you to end-up with the wrong type of points-cam.
__ Which type of ignition-system do you need the points-cam for ? _ There's two different cam-types,, one for battery/DC.powered ignition-systems, and another for magneto/AC.powered ign.systems ! _ So you should have a preference for one version or the other. _ (Although it can be made possible to use the DC.type point-cam with an AC.type ign.system.)
__ Do you already have a good '18-degree' or '28-degree' advancer-assembly ?
Hopeful-Cheers,
DCT-Bob
Re: 250 Narrow Case points cam
Posted: Thu Apr 23, 2015 12:25 am
by alno
Sorry for not enough information. 1965 250 Monza generator, battery & points with 24 degree advance. I'm working with a friend on a distributor machine so I've sent him my spare coil, point plate, but I forgot the cam.
Thank You
Al