lower bevel tower extractor

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

kalli
Posts: 18
Joined: Sun Mar 30, 2014 12:36 am

lower bevel tower extractor

Postby kalli » Sat Dec 06, 2014 9:51 am

good morning all,

i have searched but can not find it, can you please tell me the dimensions of the (factory tool ) extractor required to remove the lower bevel tower.

thread size pitch (where it screws in the tower)
tread size for the rest of the rod if diferent that the above
inner part, threaded rod lenght
outer part spacer OD, ID, lenght

can not locate it so i intent to make it, any pointers or comments are welcome

thanks
kalli
1972 350 scr

Rick
Posts: 340
Joined: Thu Nov 11, 2010 1:12 am
Location: Northern Plains, USA

Re: lower bevel tower extractor

Postby Rick » Sat Dec 06, 2014 5:04 pm

extractor.jpg


The lower thread is 37x1, upper is 37x2
Threaded plug is 95mm tall
Collar is 60mm tall

If you included your location- even which continent- someone nearby might loan you the tool

Rick
You do not have the required permissions to view the files attached to this post.

joe46ho
Posts: 247
Joined: Mon Jun 20, 2011 10:45 pm
Location: Erlanger, Ky
Contact:

Re: lower bevel tower extractor

Postby joe46ho » Sat Dec 06, 2014 5:22 pm

Ian Gowanloch Should have an oem tool available to sell... I bought mine from him last year, and at the time he had several...

Joe
Too many projects to list...
12 Ducati singles currently

machten
Posts: 507
Joined: Sat Jan 01, 2011 12:57 pm

Re: lower bevel tower extractor

Postby machten » Sun Dec 07, 2014 12:36 pm

Don't know where you are, but I have the original factory tool in Western Australia if that is any help. If you are not in Australia, probably not much help.

Kev

kalli
Posts: 18
Joined: Sun Mar 30, 2014 12:36 am

Re: lower bevel tower extractor

Postby kalli » Sun Dec 07, 2014 3:07 pm

thanks for all the info guys and Kev thanks for the very kind offer, i am based in Greece and i think i am going to have a long term relationship with the tool since i am still striping my engine iand it will be a while untill it goes back together.
how do we get in touch with ian gowanloch, under what name is he running his ebay shop?

thanks for the help
kalli
1972 350 scr

Sam
Posts: 95
Joined: Wed Feb 13, 2013 6:54 pm
Location: Scotland
Contact:

Re: lower bevel tower extractor

Postby Sam » Sun Dec 07, 2014 3:40 pm

This guy sells them I think for around about £30 email him and he will post one up on fleabay. http://www.ebay.co.uk/itm/ducati-single ... 4d29665546
Last edited by Sam on Mon Dec 08, 2014 6:53 am, edited 1 time in total.
WHA'S LIKE US
DAMN FEW AND THEY'RE A'DEID

machten
Posts: 507
Joined: Sat Jan 01, 2011 12:57 pm

Re: lower bevel tower extractor

Postby machten » Sun Dec 07, 2014 5:29 pm

I think his ebay name is "italspares" from memory.

Kev

kalli
Posts: 18
Joined: Sun Mar 30, 2014 12:36 am

Re: lower bevel tower extractor

Postby kalli » Tue Dec 30, 2014 7:48 pm

Sam wrote:This guy sells them I think for around about £30 email him and he will post one up on fleabay. http://www.ebay.co.uk/itm/ducati-single ... 4d29665546


i did get the extractor and a flywheel puller from this seller, and i have to say good service indeed.
1972 350 scr


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 53 guests