I've come across another camshaft in the boxes of parts I've acquired and have no idea what it fits. It is approx. 10mm longer than the others I've got and the profiles look very similar to the green/white one Ducati-Bob identified for me. The threaded end is the same as the other cams I have so do believe its from a Ducati.
The one in the foreground I'm unsure of against a 250 scrambler cam.
Another camshaft question.
Moderator: ajleone
-
Ian B
- Posts: 37
- Joined: Wed May 28, 2014 2:18 am
- Location: Lincoln UK
- Contact:
Another camshaft question.
You do not have the required permissions to view the files attached to this post.
Ducati newcomer.. still learning. Treat me as an idiot and you won't go far wrong.
-
Eldert
- Posts: 805
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Another camshaft question.
Hi Ian
that camshaft is from a valvespring beveltwin 750 or 860
Eldert
that camshaft is from a valvespring beveltwin 750 or 860
Eldert
-
Ian B
- Posts: 37
- Joined: Wed May 28, 2014 2:18 am
- Location: Lincoln UK
- Contact:
Re: Another camshaft question.
Eldert wrote:Hi Ian
that camshaft is from a valvespring beveltwin 750 or 860
Eldert
Many thanks for that Eldert, I came across a packet of clutch plates marked Ducati 860 so I guess a previous owner had a bevel twin too!
Ducati newcomer.. still learning. Treat me as an idiot and you won't go far wrong.
-
DewCatTea-Bob
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Another camshaft question.
[quote= Ian B ...
" the profiles look very similar to the green/white one Ducati-Bob identified "
____ I've never examined the lobe-profile of any 860-cam (which I think were the same mild-cam as of the 1975 750GT model), but if indeed the profiles appear pretty-much the same as your G&W.cam, then I'd more suspect your L-twin bevel-cam to be that of a 1971-74 750-Sport.
Dukaddy-DUKEs,
-Bob
" the profiles look very similar to the green/white one Ducati-Bob identified "
____ I've never examined the lobe-profile of any 860-cam (which I think were the same mild-cam as of the 1975 750GT model), but if indeed the profiles appear pretty-much the same as your G&W.cam, then I'd more suspect your L-twin bevel-cam to be that of a 1971-74 750-Sport.
Dukaddy-DUKEs,
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 83 guests