Motoscrubs.com

Posted: **Thu Mar 13, 2014 5:58 pm**

The two solutions that I have seen for the left side kick start clearance problem are a folding brake + peg and a curved lever arm that goes under the rear set. The rear set I got had the folding peg and I bought an 8 mm pin and replaced the 8mm cap screw that held the brake tab on. Had to ream out the threads slightly and the 30mm reach pin fit perfectly. Sometimes you get lucky.. Tom

http://pic80.picturetrail.com:80/VOL212 ... 982402.jpg

http://pic80.picturetrail.com:80/VOL212 ... 982403.jpg
http://pic80.picturetrail.com:80/VOL212 ... 982404.jpg

250 rear sets