Help with fitting a sidestand to a widecase

[graeme]

RT side stand,,,

[Ventodue]

RT side stand,,,

Thanks Graeme. Useful. I had a look at what might be required yesterday, and those photos confirm it. Hmmmm...

@ Eldert : Yes, please - any measurements you've got will be useful.

[machten]

Craig,

Western Australian M3D side stand. Engineered from genuine Jarrah (Swan River Mahogany), Ducati part number unknown. Make me an offer before I put it on eBay .

photo.JPG

Kev

[Ventodue]

Jarrah, you say, Kev? WAY too expensive for me ...

[Eldert]

i measured the 3 sidestands i had laying around . the shortest one is 255 mm centre pivot to edge of stand .
the middle one is 270 mm ( i presume this is the widecase mark 3 stand ) and the longest one is 325 mm ( scrambler )

it is not only the 19 inch rim on a scrambler . the fork stancions are longer 59 or 60 cm . plus the damperrods are longer . a scrambler fork has 14 cm travel and a Mark 3 with a 35 mm Marzocchi fork 12 cm . RT forks have even more travel 16 cm .


Eldert

[Ventodue]

Many thanks Eldert - all noted down for future reference. ("Fork travel" - of course!)

(I missed the one that was just on eBay (second again!). So the hunt continues ...)

Ciao

Craig