Anyone know what the Borrani front 19 and rear 18 inch numbers and width should be on a 74 ?
Graeme
Scrambler Borrani Rim Numbers?
Moderator: ajleone
-
- Posts: 943
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
-
- Posts: 772
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Scrambler Borrani Rim Numbers?
Hi Graeme
the front is the same as the blue/gold Mark3 a 19 inch WM2 with 4741 drilling code
the rear is the same as a RT 4626 WM3 and 36 spoke not to confuse with a 4626/1 with is a 40 spoke rim for the 750 Sport rear brakedrum
Regards Eldert
the front is the same as the blue/gold Mark3 a 19 inch WM2 with 4741 drilling code
the rear is the same as a RT 4626 WM3 and 36 spoke not to confuse with a 4626/1 with is a 40 spoke rim for the 750 Sport rear brakedrum
Regards Eldert
Last edited by Eldert on Sat Jan 25, 2014 3:23 pm, edited 3 times in total.
-
- Posts: 955
- Joined: Mon Mar 08, 2010 3:23 pm
- Location: Montpellier, France
Re: Scrambler Borrani Rim Numbers?
According to Massimo Clarke, Graeme, they were the same as fitted on the (drum-braked) Desmo and Mark 3.* In which case, I think the sizes are:
19 x 1.85(WM2) x 36
18 x 1.85(WM2) x 36.
Sorry, don't know the Borrani codes. You could try asking Howard at Disco Volante, seeing as he's a Borrani importer - Howard's on this Forum. But for what it's worth, the parts book I have for the 1974 Mark 3 says that the Ducati part numbers should be:
Front: 0682.77.104
Back: 0682.80.100
* Initially, I thought this couldn't be right for the front one, the Scrambler one being 19"; but I see that Mick Walker says that the 73-74 Mark 3 used a 19" wheel.
HTH
Craig
19 x 1.85(WM2) x 36
18 x 1.85(WM2) x 36.
Sorry, don't know the Borrani codes. You could try asking Howard at Disco Volante, seeing as he's a Borrani importer - Howard's on this Forum. But for what it's worth, the parts book I have for the 1974 Mark 3 says that the Ducati part numbers should be:
Front: 0682.77.104
Back: 0682.80.100
* Initially, I thought this couldn't be right for the front one, the Scrambler one being 19"; but I see that Mick Walker says that the 73-74 Mark 3 used a 19" wheel.
HTH
Craig
-
- Posts: 943
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Re: Scrambler Borrani Rim Numbers?
Thank you gentlemen that what I needed.
Regards
Graeme
Regards
Graeme
-
- Posts: 943
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Re: Scrambler Borrani Rim Numbers?
Hello Eldert,
Thank you for your earlier answer.
Now I have been wondering about the drilling code you mentioned. Does 4741 tell a rim maker what angle to drill a non drilled rim?
And how does the /1 change the drilling from a 4626 to a 4626/1 ?
Are you able to tell me this?
I'm interested to know, not that I will need to do any drilling, just interested.
Regards
Graeme
Thank you for your earlier answer.
Now I have been wondering about the drilling code you mentioned. Does 4741 tell a rim maker what angle to drill a non drilled rim?
And how does the /1 change the drilling from a 4626 to a 4626/1 ?
Are you able to tell me this?
I'm interested to know, not that I will need to do any drilling, just interested.
Regards
Graeme
-
- Posts: 772
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Scrambler Borrani Rim Numbers?
Hi Graeme
i dont have a clue how they come up with the codes.
i think it is Borrani that came up with the codes
Eldert
i dont have a clue how they come up with the codes.
i think it is Borrani that came up with the codes
Eldert
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: RayMini997 and 221 guests