Vento 350 key switch

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Forum rules
Post Reply
SNOWY19640
Posts: 8
Joined: Sat Oct 12, 2013 4:34 pm
Location: BRIBIE ISLAND AUSTRALIA

Vento 350 key switch

Postby SNOWY19640 » Thu Oct 17, 2013 11:54 am

Wanted - Vento 350 key switch ( start switch ) - or can another brand / type be substituted ?? :D

tibisuke222-img600x313-1380866732qdz6vl80622.jpg
You do not have the required permissions to view the files attached to this post.
Top
Jon Pegler
Posts: 468
Joined: Sun May 16, 2010 6:19 pm

Re: Vento 350 key switch

Postby Jon Pegler » Thu Oct 17, 2013 2:03 pm

The switch in your photo is not an original Vento ignition switch.
The original switches are not very good and not really repairable, as the metal body is crimped over the plastic innards.
I found that it would intermittently cut the ignition whilst going along, which was a bit of a pain.
I have got a few of those switches, some even with keys, if you are interested, although I am in the UK.
I think I substituted a Lucas switch from a Triumph Bonneville on my own Vento and it works much better than the old one.
It is a simple two position switch -OFF/ON

Jon
Top
graeme
Posts: 1006
Joined: Sun Mar 25, 2012 12:00 am
Location: Tasmania Australia

Re: Vento 350 key switch

Postby graeme » Fri Oct 18, 2013 7:05 am

BJ's Bikes in Wooloongabba has Triumph, BSA and Norton parts,,,
66 Deshon St
(07) 3391 7322

Graeme
Top
SNOWY19640
Posts: 8
Joined: Sat Oct 12, 2013 4:34 pm
Location: BRIBIE ISLAND AUSTRALIA

Re: Vento 350 key switch

Postby SNOWY19640 » Fri Oct 18, 2013 7:16 am

Thank you Graeme - I will look them up.
Top
Post Reply

Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 95 guests