Center mount Veglia tach bracket?

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

JimF
Site Admin
Posts: 1124
Joined: Fri Oct 23, 2009 2:49 am

Center mount Veglia tach bracket?

Postby JimF » Wed Jul 03, 2013 3:26 am

http://www.motoscrubs.com/MediaRSS_Gall ... CN1532.JPG


Does anyone sell reproduction brackets of this Veglia tach mount?


Jim


DSCN1532.JPG
You do not have the required permissions to view the files attached to this post.

double diamond
Posts: 555
Joined: Thu Apr 28, 2011 1:20 am

Re: Center mount Veglia tach bracket?

Postby double diamond » Mon Jul 08, 2013 8:18 pm

Jim, I had a few of these made up several years ago. Sold a few on ebay but if I have any left (pretty sure I do) I'll send you a pic and see if you're interested. I had them made in aluminum. The originals (at least, one I was shown that was supposed to be original) were thin sheet steel, so mine are not original specification in that respect. Matt

KarstenH
Posts: 71
Joined: Sun Nov 20, 2011 5:44 pm

Re: Center mount Veglia tach bracket?

Postby KarstenH » Tue Jul 09, 2013 6:49 pm

Hallo double diamond,

do you have a drawing from this brackets?
For my Diana project i wont to made such a bracket for a modern tacho.

Regards Karsten

double diamond
Posts: 555
Joined: Thu Apr 28, 2011 1:20 am

Re: Center mount Veglia tach bracket?

Postby double diamond » Tue Jul 09, 2013 7:13 pm

Karsten,

I just made a tracing of an existing bracket and gave it to a sheet metal fabrication shop. Got the brackets back but not the tracing.

Regards, Matt

JimF
Site Admin
Posts: 1124
Joined: Fri Oct 23, 2009 2:49 am

Re: Center mount Veglia tach bracket?

Postby JimF » Thu Jul 11, 2013 2:01 am

Hi Matt,

If you can find a bracket I am sure I will buy one.


Let me know.

Thanks

Jim

gtrench
Posts: 31
Joined: Thu May 02, 2013 1:33 am
Location: Southern California, USA

Re: Center mount Veglia tach bracket?

Postby gtrench » Thu Jul 11, 2013 4:25 am

Hi Everyone,
I need one too....if anybody has access to a water jet/CNC these couldn't be hard to replicate. I have a rough drawing I traced off of one years ago, but it's just a pencil sketch on some yellow writing paper (should have taken it more seriously in retrospect!)

-Gabe Trench
You do not have the required permissions to view the files attached to this post.

double diamond
Posts: 555
Joined: Thu Apr 28, 2011 1:20 am

Re: Center mount Veglia tach bracket?

Postby double diamond » Thu Jul 11, 2013 2:19 pm

Jim,

I found the brackets. I have several left. I've attached some pictures. $25 each plus whatever shipping works out to be (the brackets are pretty small so shipping shouldn't be much).

Gabe,

I can ship you one or bring one to El Camino, which will be here before we know it!

Matt

tachplate.JPG

DSCN2136.JPG

DSCN2133.JPG
You do not have the required permissions to view the files attached to this post.

gtrench
Posts: 31
Joined: Thu May 02, 2013 1:33 am
Location: Southern California, USA

Re: Center mount Veglia tach bracket?

Postby gtrench » Fri Jul 12, 2013 7:24 am

HI Matt,
I can wait until El Camino if you don't mind holding onto one for me. Thanks!!!
-Gabe

JimF
Site Admin
Posts: 1124
Joined: Fri Oct 23, 2009 2:49 am

Re: Center mount Veglia tach bracket?

Postby JimF » Sat Jul 13, 2013 2:54 pm

Sending PM

Cam3512
Posts: 23
Joined: Sun Dec 15, 2013 11:50 pm
Location: Ocean County, NJ
Contact:

Re: Center mount Veglia tach bracket?

Postby Cam3512 » Mon Dec 16, 2013 2:07 am

Matt,

Any of these brackets left?

Cam


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 52 guests