http://www.motoscrubs.com/MediaRSS_Gall ... CN1532.JPG
Does anyone sell reproduction brackets of this Veglia tach mount?
Jim
Center mount Veglia tach bracket?
Moderator: ajleone
-
- Site Admin
- Posts: 1124
- Joined: Fri Oct 23, 2009 2:49 am
Center mount Veglia tach bracket?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 555
- Joined: Thu Apr 28, 2011 1:20 am
Re: Center mount Veglia tach bracket?
Jim, I had a few of these made up several years ago. Sold a few on ebay but if I have any left (pretty sure I do) I'll send you a pic and see if you're interested. I had them made in aluminum. The originals (at least, one I was shown that was supposed to be original) were thin sheet steel, so mine are not original specification in that respect. Matt
-
- Posts: 71
- Joined: Sun Nov 20, 2011 5:44 pm
Re: Center mount Veglia tach bracket?
Hallo double diamond,
do you have a drawing from this brackets?
For my Diana project i wont to made such a bracket for a modern tacho.
Regards Karsten
do you have a drawing from this brackets?
For my Diana project i wont to made such a bracket for a modern tacho.
Regards Karsten
-
- Posts: 555
- Joined: Thu Apr 28, 2011 1:20 am
Re: Center mount Veglia tach bracket?
Karsten,
I just made a tracing of an existing bracket and gave it to a sheet metal fabrication shop. Got the brackets back but not the tracing.
Regards, Matt
I just made a tracing of an existing bracket and gave it to a sheet metal fabrication shop. Got the brackets back but not the tracing.
Regards, Matt
-
- Site Admin
- Posts: 1124
- Joined: Fri Oct 23, 2009 2:49 am
Re: Center mount Veglia tach bracket?
Hi Matt,
If you can find a bracket I am sure I will buy one.
Let me know.
Thanks
Jim
If you can find a bracket I am sure I will buy one.
Let me know.
Thanks
Jim
-
- Posts: 31
- Joined: Thu May 02, 2013 1:33 am
- Location: Southern California, USA
Re: Center mount Veglia tach bracket?
Hi Everyone,
I need one too....if anybody has access to a water jet/CNC these couldn't be hard to replicate. I have a rough drawing I traced off of one years ago, but it's just a pencil sketch on some yellow writing paper (should have taken it more seriously in retrospect!)
-Gabe Trench
I need one too....if anybody has access to a water jet/CNC these couldn't be hard to replicate. I have a rough drawing I traced off of one years ago, but it's just a pencil sketch on some yellow writing paper (should have taken it more seriously in retrospect!)
-Gabe Trench
You do not have the required permissions to view the files attached to this post.
-
- Posts: 555
- Joined: Thu Apr 28, 2011 1:20 am
Re: Center mount Veglia tach bracket?
Jim,
I found the brackets. I have several left. I've attached some pictures. $25 each plus whatever shipping works out to be (the brackets are pretty small so shipping shouldn't be much).
Gabe,
I can ship you one or bring one to El Camino, which will be here before we know it!
Matt
I found the brackets. I have several left. I've attached some pictures. $25 each plus whatever shipping works out to be (the brackets are pretty small so shipping shouldn't be much).
Gabe,
I can ship you one or bring one to El Camino, which will be here before we know it!
Matt
You do not have the required permissions to view the files attached to this post.
-
- Posts: 31
- Joined: Thu May 02, 2013 1:33 am
- Location: Southern California, USA
Re: Center mount Veglia tach bracket?
HI Matt,
I can wait until El Camino if you don't mind holding onto one for me. Thanks!!!
-Gabe
I can wait until El Camino if you don't mind holding onto one for me. Thanks!!!
-Gabe
-
- Site Admin
- Posts: 1124
- Joined: Fri Oct 23, 2009 2:49 am
Re: Center mount Veglia tach bracket?
Sending PM
-
- Posts: 23
- Joined: Sun Dec 15, 2013 11:50 pm
- Location: Ocean County, NJ
- Contact:
Re: Center mount Veglia tach bracket?
Matt,
Any of these brackets left?
Cam
Any of these brackets left?
Cam
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: Duccout and 13 guests