Page 1 of 2
Center mount Veglia tach bracket?
Posted: Wed Jul 03, 2013 3:26 am
by JimF
http://www.motoscrubs.com/MediaRSS_Gall ... CN1532.JPGDoes anyone sell reproduction brackets of this Veglia tach mount?
Jim
DSCN1532.JPG
Re: Center mount Veglia tach bracket?
Posted: Mon Jul 08, 2013 8:18 pm
by double diamond
Jim, I had a few of these made up several years ago. Sold a few on ebay but if I have any left (pretty sure I do) I'll send you a pic and see if you're interested. I had them made in aluminum. The originals (at least, one I was shown that was supposed to be original) were thin sheet steel, so mine are not original specification in that respect. Matt
Re: Center mount Veglia tach bracket?
Posted: Tue Jul 09, 2013 6:49 pm
by KarstenH
Hallo double diamond,
do you have a drawing from this brackets?
For my Diana project i wont to made such a bracket for a modern tacho.
Regards Karsten
Re: Center mount Veglia tach bracket?
Posted: Tue Jul 09, 2013 7:13 pm
by double diamond
Karsten,
I just made a tracing of an existing bracket and gave it to a sheet metal fabrication shop. Got the brackets back but not the tracing.
Regards, Matt
Re: Center mount Veglia tach bracket?
Posted: Thu Jul 11, 2013 2:01 am
by JimF
Hi Matt,
If you can find a bracket I am sure I will buy one.
Let me know.
Thanks
Jim
Re: Center mount Veglia tach bracket?
Posted: Thu Jul 11, 2013 4:25 am
by gtrench
Hi Everyone,
I need one too....if anybody has access to a water jet/CNC these couldn't be hard to replicate. I have a rough drawing I traced off of one years ago, but it's just a pencil sketch on some yellow writing paper (should have taken it more seriously in retrospect!)
-Gabe Trench
Re: Center mount Veglia tach bracket?
Posted: Thu Jul 11, 2013 2:19 pm
by double diamond
Jim,
I found the brackets. I have several left. I've attached some pictures. $25 each plus whatever shipping works out to be (the brackets are pretty small so shipping shouldn't be much).
Gabe,
I can ship you one or bring one to El Camino, which will be here before we know it!
Matt
tachplate.JPG
DSCN2136.JPG
DSCN2133.JPG
Re: Center mount Veglia tach bracket?
Posted: Fri Jul 12, 2013 7:24 am
by gtrench
HI Matt,
I can wait until El Camino if you don't mind holding onto one for me. Thanks!!!
-Gabe
Re: Center mount Veglia tach bracket?
Posted: Sat Jul 13, 2013 2:54 pm
by JimF
Sending PM
Re: Center mount Veglia tach bracket?
Posted: Mon Dec 16, 2013 2:07 am
by Cam3512
Matt,
Any of these brackets left?
Cam