Page 1 of 1
Desmo rocker pin O ring size?
Posted: Thu Oct 11, 2012 10:31 am
by graeme
Anyone have the O ring size for the closing rocker pin?, (item 225 on the Motoscrubs tech section parts manual) it doesn't give a size.
graeme
Re: Desmo rocker pin O ring size?
Posted: Thu Oct 11, 2012 2:03 pm
by Single duck
GACO 2018 ? Got 200 in stock
Measured with a Vernier only - OD>8.00MM ID>4.5MM T>1.75MM
Hope that helps
Re: Desmo rocker pin O ring size?
Posted: Thu Oct 11, 2012 4:01 pm
by ducwiz
GACO 2018HR is eqivalent to Parker 2-008, the dimensions are 4.47x1.78 mm, made from FKM (i. e. DuPont VITON) elastomer.
rgds Hans
Re: Desmo rocker pin O ring size?
Posted: Fri Oct 12, 2012 12:21 am
by graeme
Thank you gentlemen,
The equivelent part number in Australia is "V7-008 VITON O RING" for anyone looking here.
Regards
Graeme
Re: Desmo rocker pin O ring size?
Posted: Fri Oct 12, 2012 9:02 am
by Jordan
Is there a conversion list of GACO numbers to the "standard" 3 digit O-ring sizes?
Jordan