" I came up with 23mm as the base circle measurement. "
____ Okay then, (that's 905.5-thousandths), this measurement confirms what seems to be visible in your pix of the cam,, that larger base-circle indicates the n-c red-cam. _ (As the dia.size of the base-circle on the w-c.Mk3-camshaft is almost as small as the shaft-stock itself.)
" this same head has the coil spring conversion on it. So that would point to someone messing around with it, maybe making a cam swap more likely? "
____ Right, I tend to agree (with that sensible logic).
Duke-Cheers,
-Bob
Making A Little Progress (with pics)
Moderator: ajleone
-
DewCatTea-Bob
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Base Circle Measurement
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 82 guests