My friend and I were prying an old tire off this aluminum rim and one of the tire irons put a good size kink in the edge of the rim.
Do I just use a pliers and pend it back, or tap it with a rubber mallet? Or is there a better way to implement a repair?
Jim
Rim wreckers
Moderator: ajleone
-
JimF
- Site Admin
- Posts: 1137
- Joined: Fri Oct 23, 2009 2:49 am
Rim wreckers
You do not have the required permissions to view the files attached to this post.
-
krupp13
- Posts: 90
- Joined: Sat Nov 21, 2009 7:24 pm
Re: Rim wreckers
Hey Jim,
I would use a rubber mallet. Put a block of wood on the other side of the piece you are about to smack. I would think pliers on that aluminum would be worse trouble. If you take it easy, I bet you can work it out and barely notice.
I would use a rubber mallet. Put a block of wood on the other side of the piece you are about to smack. I would think pliers on that aluminum would be worse trouble. If you take it easy, I bet you can work it out and barely notice.
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 35 guests