The subject of frame data plates has been discussed at least once. We know that they were 'typed' on an IBM Selectric using Elite 72 fort ball.
I don't have a working typewriter, but I have a data plate and a ball.
Is anyone in the forum producing correctly typed data plates?
Thanks
David
Data plate typing.
Moderator: ajleone
-
kaysystems
- Posts: 109
- Joined: Mon Jan 14, 2013 1:57 pm
- Location: Charlottetown, PEI, Canada
Data plate typing.
1967 Narrowcase 250
2004 Ducati ST3
2004 Ducati ST3
-
Dave354
- Posts: 130
- Joined: Tue Oct 18, 2022 6:08 pm
- Location: Cornwall
Re: Data plate typing.
Hi, I wasn’t aware of the font used, however this is my attempt using manual punches
Regards
Dave
Regards
Dave
You do not have the required permissions to view the files attached to this post.
Sebring 350 based Ducati
Triumph Tiger 1200
Cornwall, UK
Triumph Tiger 1200
Cornwall, UK
-
nalimugmug
- Posts: 144
- Joined: Mon Sep 12, 2011 3:40 pm
- Location: South Glos UK
Re: Data plate typing.
Heres an original foil if this helps at all
Bob
Bob
You do not have the required permissions to view the files attached to this post.
-
kaysystems
- Posts: 109
- Joined: Mon Jan 14, 2013 1:57 pm
- Location: Charlottetown, PEI, Canada
Re: Data plate typing.
I looked for manual punches, but could only find ones that are too large. The letters don't fit in the boxes.
David
David
1967 Narrowcase 250
2004 Ducati ST3
2004 Ducati ST3
-
Dave354
- Posts: 130
- Joined: Tue Oct 18, 2022 6:08 pm
- Location: Cornwall
Re: Data plate typing.
I used a 3mm punch set similar to this….. it was good enough for a reasonable representation, I don’t think the original font will be easily found?
https://ebay.io/m/7NUZSA
https://ebay.io/m/7NUZSA
Sebring 350 based Ducati
Triumph Tiger 1200
Cornwall, UK
Triumph Tiger 1200
Cornwall, UK
-
Jordan
- Posts: 1516
- Joined: Fri Dec 24, 2010 11:29 am
Re: Data plate typing.
kaysystems wrote: they were 'typed' on an IBM Selectric using Elite 72 fort ball
David
Hi David,
Is the typewriter used to stamp the foils?
The labels then rolled to shape?
I've worked on a couple of Selectrics, in a computerised office that still had them for a specific, simple card typing job.
I was able to make one working one from the two - not fully functional but adequate for purpose.
They were impressive machines, but hellishly complex.
No wonder they had armies of technicians servicing them. So different to how things are done now.
-
kaysystems
- Posts: 109
- Joined: Mon Jan 14, 2013 1:57 pm
- Location: Charlottetown, PEI, Canada
Re: Data plate typing.
Apparently the foils were typed on a Selectric using the Elite 72 ball and no ribbon. The foils are thin enough to be placed on the bike and pressed into shape.
Used, working typewriters are way too expensive for one data plate.
I'' look to those stamps. Yes the font is incorrect, but will serve the purpose of getting the bike registered.
Thanks guys
David
Used, working typewriters are way too expensive for one data plate.
I'' look to those stamps. Yes the font is incorrect, but will serve the purpose of getting the bike registered.
Thanks guys
David
1967 Narrowcase 250
2004 Ducati ST3
2004 Ducati ST3
-
Jordan
- Posts: 1516
- Joined: Fri Dec 24, 2010 11:29 am
Re: Data plate typing.
Thanks David.
Do we know what the size of the original characters is?
I have a set, size 1/8", the width of a typical letter/number.
Good thing about this set is that it comes with a punch that holds up to eight characters neatly in line and evenly spaced.
Each character is on a rectangular steel block, 5/32" x 1/4"
The character size is 1/8" x 5/32"
The longest string of 8 characters is about 1 5/32" across extreme ends of characters.
Interesting that the manufacturer was a maker of typewriters.
Do we know what the size of the original characters is?
I have a set, size 1/8", the width of a typical letter/number.
Good thing about this set is that it comes with a punch that holds up to eight characters neatly in line and evenly spaced.
Each character is on a rectangular steel block, 5/32" x 1/4"
The character size is 1/8" x 5/32"
The longest string of 8 characters is about 1 5/32" across extreme ends of characters.
Interesting that the manufacturer was a maker of typewriters.
You do not have the required permissions to view the files attached to this post.
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 104 guests