Hi Wolf,
I think that Nigel or Eldert need to give an opinion on that; cast iron does tend to have impurities and blemishes in it, and those blow holes may not matter, or then again they might....
What do others think?
Cheers,
Colin
450 SCR engine rebuild
Moderator: ajleone
-
- Posts: 1297
- Joined: Wed Feb 05, 2020 1:20 pm
- Location: Essex UK
-
- Posts: 491
- Joined: Thu Mar 01, 2018 1:06 am
- Location: northern ireland
Re: 450 SCR engine rebuild
I wouldn't use those.
Cheers,
George
Cheers,
George
-
- Posts: 949
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Re: 450 SCR engine rebuild
Agreed, I wouldn’t use them either
Graeme
Graeme
-
- Posts: 92
- Joined: Tue Nov 16, 2021 5:03 pm
- Location: Berlin, Germany
Re: 450 SCR engine rebuild
...thanks for the feedback! I've already bought a different set of rings.
Cheers
Wolf
Cheers
Wolf
-
- Posts: 92
- Joined: Tue Nov 16, 2021 5:03 pm
- Location: Berlin, Germany
Re: 450 SCR engine rebuild
My 450 SCR is back on the road!
Everything is working nicely - thanks a lot again for your valuable input and help!
Cheers
Wolf
Everything is working nicely - thanks a lot again for your valuable input and help!
Cheers
Wolf
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1297
- Joined: Wed Feb 05, 2020 1:20 pm
- Location: Essex UK
Re: 450 SCR engine rebuild
That's a really nice bike Wolf, just keep checking that flywheel nut!
Cheers,
Colin
Cheers,
Colin
-
- Posts: 491
- Joined: Thu Mar 01, 2018 1:06 am
- Location: northern ireland
Re: 450 SCR engine rebuild
Looking good.....enjoy!
Cheers,
George
Cheers,
George
-
- Posts: 654
- Joined: Sat Jun 14, 2014 12:44 am
- Location: Scotland
Re: 450 SCR engine rebuild
Very nice Wolf, now wear it out!
Good health, Bill
Good health, Bill
-
- Posts: 92
- Joined: Tue Nov 16, 2021 5:03 pm
- Location: Berlin, Germany
Re: 450 SCR engine rebuild
Bill, that's the plan!
I'm looking forward to - this bike is not made for sitting in the garage. Hope to bring it over the alps to do some nice cornering and have a lot of espresso in the bars connected to the gas stations..
Cheers
Wolf
I'm looking forward to - this bike is not made for sitting in the garage. Hope to bring it over the alps to do some nice cornering and have a lot of espresso in the bars connected to the gas stations..
Cheers
Wolf
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 14 guests