Speedo drive felt dust seal?

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Forum rules
Post Reply
kaysystems
Posts: 81
Joined: Mon Jan 14, 2013 1:57 pm
Location: Charlottetown, PEI, Canada

Speedo drive felt dust seal?

Postby kaysystems » Sun Jan 29, 2023 12:48 pm

Hi

On the speedo drive plate of the front hub of a 250 there is a 55mm diameter felt seal and holder.
Has anyone replaced this or found one? The felt on mine is virtually all gone.

Thanks

David
1967 Narrowcase 250
2004 Ducati ST3
Top
Dave354
Posts: 119
Joined: Tue Oct 18, 2022 6:08 pm
Location: Cornwall

Re: Speedo drive felt dust seal?

Postby Dave354 » Mon Jan 30, 2023 1:53 pm

Is that the felt covering the wheel bearing? If it is they become redundant when the wheel is fitted with new sealed roller bearings. I can check the ones I took off my hub to see if they are still serviceable?

Regards

Dave
Sebring 350 based Ducati
Triumph Tiger 1200
Cornwall, UK
Top
Dave354
Posts: 119
Joined: Tue Oct 18, 2022 6:08 pm
Location: Cornwall

Re: Speedo drive felt dust seal?

Postby Dave354 » Mon Jan 30, 2023 2:01 pm

Cancel my last…. I was looking on the wrong side…. I’ll look in my spares box anyway…..
Sebring 350 based Ducati
Triumph Tiger 1200
Cornwall, UK
Top
Post Reply

Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 57 guests