350 scrambler
Moderator: ajleone
-
- Posts: 93
- Joined: Mon May 14, 2018 10:31 am
- Location: Mallorca
Re: 350 scrambler
350 engine from a low mileage crashed bike (Forza?). Comes c/w electric start and/or kickstart cover. Gear lever available. Rear hub components available except for 24hrs style plate.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 93
- Joined: Mon May 14, 2018 10:31 am
- Location: Mallorca
Re: 350 scrambler
Please submit email addresses if you are interested, cheers,Dave
-
- Posts: 1450
- Joined: Wed Feb 05, 2020 1:20 pm
- Location: Essex UK
-
- Posts: 14
- Joined: Tue Jun 16, 2020 12:20 pm
-
- Posts: 467
- Joined: Sun May 16, 2010 6:19 pm
Re: 350 scrambler
Dave, (Lost Soul)
Note that the motor for sale is a late Forza motor with the electric start behind the cylinder barrel.
That motor has the long crankshaft and has to be used with the LH electric start cover.
It will not easily fit into a Scrambler frame.
Jon
Note that the motor for sale is a late Forza motor with the electric start behind the cylinder barrel.
That motor has the long crankshaft and has to be used with the LH electric start cover.
It will not easily fit into a Scrambler frame.
Jon
You do not have the required permissions to view the files attached to this post.
-
- Posts: 14
- Joined: Tue Jun 16, 2020 12:20 pm
Re: 350 scrambler
Hi Jon
Thanks for the info.
PM you
Cheers
Dave
Thanks for the info.
PM you
Cheers
Dave
-
- Posts: 93
- Joined: Mon May 14, 2018 10:31 am
- Location: Mallorca
Re: 350 scrambler
Behold, an S
You do not have the required permissions to view the files attached to this post.
-
- Posts: 93
- Joined: Mon May 14, 2018 10:31 am
- Location: Mallorca
Re: 350 scrambler
I know it’s not a 5 but at least it’s an S
-
- Posts: 467
- Joined: Sun May 16, 2010 6:19 pm
Re: 350 scrambler
An S head would usually have been fitted to a 200 Elite motor.
It is a good head to fit as it has the 37mm inlet valve and 35mm exhaust valve.
Some of these heads may well have ended up on late Road models as Mototrans were using up all their remaining narrowcase spares at that time.
Jon
It is a good head to fit as it has the 37mm inlet valve and 35mm exhaust valve.
Some of these heads may well have ended up on late Road models as Mototrans were using up all their remaining narrowcase spares at that time.
Jon
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: Hiya9612 and 49 guests