350 valve adjustment

[gmlaverda]

I did a fair amount of searching on this website and others as well as my books and cannot get a definitive answer on what to set the valve clearances at for my 350 project bike. This Ducati is a wide case, engine #06095. It was registered as a 1969 but the chassis tag shows 196_ so not sure exactly when it was built. It is not a Desmo and has the green/white markings on the cam. From my reading here it looks as though there may or may not have been 2 different green/white cams. Currently the intake valve is reading 0.004" and the exhaust is reading 0.006". It has not run in years. Trying to learn more about this fascinating engine. Thanks

[Ventodue]

1969 is right for your engine number.

According to the owner's handbook from May 1968, valve clearances are 0.10mm (0.004" if you insist .

[Eldert]

the 0.006 clearance for the exhaust is correct to .

Eldert

[gmlaverda]

Thank you gentlemen. Not sure why I could not find these same numbers but I do appreciate the help.