Anybody know what size tap "A" and "B" are supposed to be? Seems like an M10 for both, but mine are not in great shape so it is hard to tell. When I thread an M10 in it is very loose. It could just be corrosion and wear over the years though.
Thanks.
Jim
Frame Tapped Hole Sizes?
Moderator: ajleone
-
blaat!
- Posts: 261
- Joined: Thu Aug 25, 2011 4:31 pm
- Location: Massachusetts
Frame Tapped Hole Sizes?
You do not have the required permissions to view the files attached to this post.
-
ranton_rambler
- Posts: 476
- Joined: Sun Jun 04, 2017 11:33 am
- Location: Stafford UK
Re: Frame Tapped Hole Sizes?
A and B are fine and normal pitch, but I can't remember which way round.
-
Eldert
- Posts: 805
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Frame Tapped Hole Sizes?
both are 7 /16 unf .
Eldert
Eldert
-
blaat!
- Posts: 261
- Joined: Thu Aug 25, 2011 4:31 pm
- Location: Massachusetts
Re: Frame Tapped Hole Sizes?
WAIT, WHAT? They are not metric? That is madness. Thanks Eldert!
-
ducwiz
- Posts: 604
- Joined: Tue May 22, 2012 12:52 pm
- Location: near Frankfurt, Germany
Re: Frame Tapped Hole Sizes?
When I got my w/c 350D frame powder coated in 1982, I had to clean both threads for the footpeg after the processing. As I had no access to any "inched" taps then, I used a metric M11x1.25, which worked for me.
cheers Hans
cheers Hans
-
Vintmoto
- Posts: 43
- Joined: Sat Apr 11, 2015 2:54 am
Re: Frame Tapped Hole Sizes?
Yes, those and the rear set mounting lugs are the 7/16 unf size. Story goes that the factory got a good deal on foot pegs in that size. Who knows for sure.
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 73 guests