I do believe there are two cams with the project. The 'white-green' and a milder cam. I'm not home yet but I remember the condition of the milder cam looking a bit dodgy. I was going to take both cams to a shop nearby where he can examine the surfacing of the cams and determine if they are salvageable!
I think Graham had work and family get in the way of the project but he's going to keep in touch with me. I've promised him a ride when it's done!
Jim
350 Scrambler Project - Vancouver, Canada
Moderator: ajleone
-
helicopterjim
- Posts: 3
- Joined: Fri Aug 22, 2014 7:28 pm
-
DewCatTea-Bob
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: 350 Scrambler Project - Camshafts
[quote= helicopterjim ...
" I do believe there are two cams with the project. The 'white-green' and a milder cam. "
____ You ought-to ask Graham what cam.model the milder one is ! _ And it would also be of interest as to where he acquired it from.
Duke-Cheers,
-Bob
" I do believe there are two cams with the project. The 'white-green' and a milder cam. "
____ You ought-to ask Graham what cam.model the milder one is ! _ And it would also be of interest as to where he acquired it from.
Duke-Cheers,
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
-
helicopterjim
- Posts: 3
- Joined: Fri Aug 22, 2014 7:28 pm
Re: 350 Scrambler Project - Vancouver, Canada
I will do that .... we will be getting together sometime in September.
I'll post some updated photo's when I can.
Jim
I'll post some updated photo's when I can.
Jim
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 74 guests