Thanks, ST3.
Did we talk?
I was lucky to find a piston and ring set from Classic Italian Bikes in the Netherlands.
Amazing re-sleeve by Northhampton Crank! The sleeve is a half-thickness thin -wall, if the whole sleeve was bored out, you would see air between the fins!
![Image](http://i606.photobucket.com/albums/tt146/vintagestan/Ducati%20Sport%2048/P1040078_zps12d49f48.jpg)
White CAD parts are back, time to lace the wheels:
![Image](http://i606.photobucket.com/albums/tt146/vintagestan/Ducati%20Sport%2048/P1040079_zps5bec7476.jpg)
Improvised truing stand. The wheel has bicycle type loose ball bearings:
![Image](http://i606.photobucket.com/albums/tt146/vintagestan/Ducati%20Sport%2048/P1040080_zpsbfe04b7b.jpg)
I'm getting ready for chassis assembly, when I get a few more parts back from the chrome plater:
![Image](http://i606.photobucket.com/albums/tt146/vintagestan/Ducati%20Sport%2048/P1040088_zps827dca94.jpg)
Stan