Search found 482 matches

by Eldert
Tue Jun 12, 2018 8:43 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Static ignition timing
Replies: 14
Views: 325

Re: Static ignition timing

Bevel bob wrote:I think the units only advance half those amounts but its doubled by the gearing?.


so what would be the crankshaft degrees advance then ?
by Eldert
Tue Jun 12, 2018 2:29 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Static ignition timing
Replies: 14
Views: 325

Re: Static ignition timing

what automatic advance unit do you have ?

the AA 367 B ( advances 18 degrees ) or the AA 359 ( advances 28 degrees )

Eldert
by Eldert
Wed May 23, 2018 5:59 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Narrowcase crankcase screws
Replies: 14
Views: 607

Re: Narrowcase crankcase screws

another thing is when shimming the gearbox pull the shafts all the way in the bearings , so put on the front sprocket and for the clutch side i use the centre piece and a piece of tubing to pull the shaft in the bearing .

Eldert
by Eldert
Tue May 15, 2018 2:59 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Narrowcase crankcase screws
Replies: 14
Views: 607

Re: Narrowcase crankcase screws

the holes are for a wire and a lead seal .
are you sure you want to use the 50+ year old screws with rounded inside hexagons and not new ones ?

Eldert
by Eldert
Tue May 08, 2018 5:51 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Dummy Battery Box for narrow case
Replies: 3
Views: 243

Re: Dummy Battery Box for narrow case

the Ducati vintage store sells a dummy batterybox for 21 euro .

Eldert
by Eldert
Tue Apr 24, 2018 6:51 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: widecase desmo disc speedo drive
Replies: 8
Views: 422

Re: widecase desmo disc speedo drive

Hi George

i think you need the one with a 20/10 ratio . that is the one for a 18 inch wheel and Smiths or Veglia clock

Eldert
by Eldert
Wed Apr 18, 2018 9:20 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: First Ducati
Replies: 44
Views: 1500

Re: First Ducati

i have a 450 engine with engine nr 460754 and it still has the narrower bolt spacing . i checked a few 450 cases i had laying around and i have a case with number 460754 and it had the wider spacing. Eh? What? Which? :D typo , should read 460569 allready has the wider bolt spacing and the later 460...
by Eldert
Tue Apr 17, 2018 9:29 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: First Ducati
Replies: 44
Views: 1500

Re: First Ducati

If this engine is 450,,, The very last series had wider spaced bolts forward and rear of the cylinder opening in the cases. The serial number for these was 46———— (I don’t know what number this case change started) Regards Graeme i have a 450 engine with engine nr 460754 and it still has the narrow...
by Eldert
Mon Apr 16, 2018 6:46 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: First Ducati
Replies: 44
Views: 1500

Re: First Ducati

If this engine is 450,,, The very last series had wider spaced bolts forward and rear of the cylinder opening in the cases. The serial number for these was 46———— (I don’t know what number this case change started) Regards Graeme i have a 450 engine with engine nr 460754 and it still has the narrow...
by Eldert
Mon Apr 09, 2018 9:31 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 250 Crank Pin Bearing
Replies: 24
Views: 1385

Re: 250 Crank Pin Bearing

Dave

that is not a good idea . you go thru the hardened track and the bearing wil run on the soft material .
wont last long .

Eldert

Go to advanced search