Search found 316 matches

by Rick
Thu Jan 03, 2019 10:38 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Looking for a set of triple trees
Replies: 3
Views: 494

Re: Looking for a set of triple trees

I have a pile of those clamps, Betor, Ceriani/Arces, and an unknown set- all 180mm between tubes and 60 and 62mm offset.
PM me if interested.
Rick

clamps.JPG
by Rick
Tue Dec 25, 2018 1:42 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: restoring a 1970 mark 3 desmo 350
Replies: 14
Views: 1254

Re: restoring a 1970 mark 3 desmo 350

Craig(Ventodue) is very generous with his time and knowledge- when I was looking for a hard to find document he sent me a pdf- probably scanned it for me. Ducati made some changes on models sent to the USA vs the European standard- it's great to have someone on this forum to help the US members figu...
by Rick
Tue Dec 04, 2018 8:10 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 1966 250 Monza => 350 Bitsa
Replies: 14
Views: 5504

Re: 1966 250 Monza => 350 Bitsa

Three years is nothing- would rank as a 'current' project to me, but, to your 'what an unfinished project is worth?', question, the best way to find out is to put it on Ebay and see where the market values it. I expect you'll be disappointed- unfinished projects aren't highly desired- you've probabl...
by Rick
Wed Oct 31, 2018 12:52 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: E. Baroni
Replies: 2
Views: 679

Re: E. Baroni

Matt-
From Mick Walker's book on Aermacchi:
Rick

baroni 1.png

baroni 2.png
by Rick
Sat Oct 27, 2018 11:57 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 28tooth cam gear dimensions
Replies: 5
Views: 925

Re: 28tooth cam gear dimensions

After thinking about these gears a little more, the factory only offered them as a pair, so the different part numbers were probably the different lengths of the tower shaft, and the 28t camshaft gear is probably the same in the 250/350/450 gear sets.
Rick
by Rick
Sat Oct 27, 2018 10:08 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 28tooth cam gear dimensions
Replies: 5
Views: 925

Re: 28tooth cam gear dimensions

Jack, I can offer some info- The attached photo shows, left to right, a round case 750 twin gear, an unknown gear, and a narrowcase single gear. The middle gear was on a narrowcase tower shaft, with the snap ring- the way I and others usually save these gears to keep gears with matching grinding mar...
by Rick
Mon Aug 06, 2018 8:16 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Manifold for Dellorto PHF 32
Replies: 8
Views: 1630

Re: Manifold for Dellorto PHF 32

Jack, I'll attach a photo of a manifold that would meet your specs- the 750SS and 900SS have 58mm stud spacing- the 750GT and 750 Sport have the 52mm spacing you're looking for, but the GT and Sport front manifolds and GT rear are the elbow style, so you want a Sport rear manifold, like this: sport....
by Rick
Sun Jul 22, 2018 12:18 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 250 Monza Project, might build a mini Super Sport
Replies: 6
Views: 1222

Re: 250 Monza Project, might build a mini Super Sport

An old brake with glazed, hard shoes and a rusty, out of round hub probably won't stop that great, but if rebuilt it will work fine. The 2 sided single leading shoe brake isn't that much of an improvement- the photo shows that the shoes are quite a bit narrower- the gain in friction area isn't as mu...
by Rick
Wed Jul 04, 2018 6:28 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Narrow Case AC vs DC coil
Replies: 4
Views: 1215

Re: Narrow Case AC vs DC coil

The primary coil is between the 2 battery posts- probably marked '1' and '15', and the secondary is between one end of the primary and the spark plug output. The battery '+' usually goes to '15', so measure the primary between '1' and '15' and the secondary between '15' and the spark plug output. De...
by Rick
Sat Apr 21, 2018 10:27 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Mach 1/Mark 3 front fender info
Replies: 10
Views: 2015

Re: Mach 1/Mark 3 front fender info

David- I'll attach a drawing of the profile of a fender I believe to be a Mach1- I didn't buy the bike new and keep an eye on it ever since, but it looks correct to me- no guarantees. Fenders I've seen all have the front edge turned- without the turned lip the edge would be really fragile- the lip g...

Go to advanced search