Search found 703 matches

by Bevel bob
Mon Apr 23, 2018 4:54 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Mach 1/Mark 3 front fender info
Replies: 10
Views: 207

Re: Mach 1/Mark 3 front fender info

You could well be right,but as my bike is for riding (and it looks tidy) it will do for me.
by Bevel bob
Mon Apr 23, 2018 6:00 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Mach 1/Mark 3 front fender info
Replies: 10
Views: 207

Re: Mach 1/Mark 3 front fender info

I recently bought a guard that was called a Mach1 type ,it has a raised front lip, a very narrow bridge without pressed feature and a bulbous shape where bolted to the fork leg.
by Bevel bob
Sun Apr 22, 2018 7:19 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 5 speed Narrow case Kickstart gear
Replies: 2
Views: 106

Re: 5 speed Narrow case Kickstart gear

You could be right Jeb as sometimes all appears ok.
by Bevel bob
Fri Apr 20, 2018 2:27 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Steering column and Damper NC 250
Replies: 3
Views: 128

Re: Steering column and Damper NC 250

Hi Jeb, Given up!, put it all back together, hammering up the top yoke was likely to ruin the column thread and the only other option was to pull down the fork legs ,remove R/c seat and tank and turn the top yoke off ,as I have just done the forks twice, I could not face it. With regard to the dampe...
by Bevel bob
Thu Apr 19, 2018 8:45 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Steering column and Damper NC 250
Replies: 3
Views: 128

Re: Steering column and Damper NC 250

I think whats happened is the alloy of the top yoke has spread into the column thread by the action of the nut, going to have to hammer it off.
by Bevel bob
Thu Apr 19, 2018 10:48 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Steering column and Damper NC 250
Replies: 3
Views: 128

Steering column and Damper NC 250

I thought to adjust the steering bearings but the column is firmly stuck in the alloy top yoke clamp and wont pull up to tighten the bearings ,is this usual?, Also the Damper knob is loose (again!!) on the damper shaft allowing the damper to drop into the wheel if it vibrates off. Been there done gr...
by Bevel bob
Thu Apr 19, 2018 8:27 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Indicators on a Mach1
Replies: 11
Views: 200

Re: Indicators on a Mach1

I thought the Turbo Visor was a vast improvement on goggles and gave really clear vision in heavy rain at speeds up to 80 mph ,not terribly good in town .
by Bevel bob
Tue Apr 17, 2018 5:36 am
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Indicators on a Mach1
Replies: 11
Views: 200

Re: Indicators on a Mach1

Hi Jordan, You might think thats a comic solution,but I could take you seriously, after all I did have a Dan Dare Stadium "Turbo" spinning Visor That was so effective I ignored the "are you from Mars ?" comments. :lol:
by Bevel bob
Sun Apr 15, 2018 2:50 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: 5 speed Narrow case Kickstart gear
Replies: 2
Views: 106

5 speed Narrow case Kickstart gear

Feels like the first tooth has gone on my KS, Does not engage till half the way down,though a little push round and then a full stroke appears. These gears are very thin on the ground , I would like to find one before I pull the bike appart but don't know exactly what they look like and if are diffe...
by Bevel bob
Sun Apr 15, 2018 2:40 pm
Forum: Ducati Singles Main Discussions (& How to Join)
Topic: Indicators on a Mach1
Replies: 11
Views: 200

Re: Indicators on a Mach1

Hi Guys, The ends of the bars are for mirrors (the fully folding type) I'm thinking more on the headlight bolts and a strip bracket across the back of the rear light, plastic really won't do so something in alloy or chrome, more to the point will need a very nifty small switch to handle horn/dip/ind...

Go to advanced search